40/44-pin Ultra IDE to Compact Flash Adapter

This adapter connects ONE Compact Flash memory card (CF Card) to an IDE host interface. Aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive.
Compact Flash disks offer the benefit of low power consumption, low operating temperature, no acoustic noise, shock resistance, and fast read access time.

This adapter supports Ultra DMA mode CF Card. It is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF Card as a standard IDE hard disk (i.e. with cylinders, heads and sectors). As such, you can install any operating systems and the CF Card will be bootable. Due to this, the CF Card in not hot swappable. Applications: Linux-based set-top boxes, routers, firewalls; diskless network clients; industrial computers; and any other device requiring rugged solid-state storage.

• Fully compatible with Compact Flash Type I, Type II, and Micro-drive.
• Support Ultra DMA mode CF Card.
• One CF Card sockets.
• LED indicators: Power, Card Detect, Read/Write Activity.
• 40-way (2.54mm) standard IDE connector.-- 44-way (2.0mm) Small Form Factor (SFF) IDE connector.
• Master or Slave mode selection by jumper setting.
• Support +3.3V and +5.0V CF Card by jumper setting.
• Power input option: +5.0V supplied from the floppy disk drive power connector, 44-way SFF IDE connector, or from the 20th pin of the 40-way IDE connector when used on VIA EPIA series embedded motherboard.
• Board size: 70mm x 63mm x 13mm (WxLxT)
• This adapter does NOT support hot insertion of CF cards.
• Support Windows 98SE/ME/2000/XP/Vista Operating System

Included

IDE to Compact Flash Adapter
User manual