• 2x Power-over-eSATA and USB Shared Ports
  • Combination of eSATA and USB in Each Port
  • Fully Compatible with Regular eSATA Cable, USB A-Type Cable and Power-over-eSATA Cable
  • Supports Power-over-eSATA, eSATA and USB Devices
  • USB 2.0 Port Functionality Extended from the Motherboard USB Pin Header*
  • Supplies DC +5V Power to the Power-over-eSATA or USB Device
  • Floppy-style 4-Pin Power Connector to Obtain Extra DC +5V Power from the Desktop PC Internal Power Supply Unit (PSU) for Driving High Power Power-over-eSATA/USB Devices (A Jumper Setting for High or Low Power is Available on Board)
• 2x eSATA II Ports
• Chipset: Pericom PI7C9X111 + Silicon Image Sil3124
• PCI-Express 2.0 1-Lane (x1) Interface
• Complies with Serial-ATA (SATA) 1.0a Specification
• Supports SATA-II with Transfer Rate up to 3.0Gbps
• Supports SATA Advanced Host Controller Interface (AHCI) Specification Rev. 1.0
• Supports Hard Disks with Native Command Queue (NCQ) Feature
• Supports SATA Port Multiplier, Such as Sil3726
• Supports Hot-Plug on all eSATA/SATA Ports
• Supports RAID 0, 1, 5, 10
• Unique Hard Disk Activity LED Indicator Circuit Designed: The LED Blinks When There is Read/Write Activity on Any One of the Hard Disk Drive Connected to the Motherboard SATA Port or to this Add-on Card

*In Order for USB Ports to Function, a Connection Between the Motherboard USB Header and This Card is Required

Hardware Requirement

PC Computer with PCI-Express (x1) Slot

Software Supports the following Operating Systems

Package Includes

Power-over-eSATA PCI-e x1 Card
2-Port USB 9-Pin Header Cable (16")
LED Cable (11")
User Manual
Driver CD