• Unique Bi-directional SATA <–> IDE Converter
• Supports 3.5-inch SATA and IDE (ATA) Hard Drive
• Supports 5.25-inch SATA and IDE (ATA) Optical Drives
• Power-On and HDD-Activity LED Indicators
• Ultra Low Power Consumption
• Connectors:
  • IDE (ATA) Connector
  • SATA host Connector (Yellow)
  • SATA Device Connector (Black)
  • 4-pin FDD Power Connector

• Two Independent Ultra ATA Channels with 128/256 Bytes Buffer Per Channel
• Plug & Play. No Driver installation Needed
• Serial ATA Interface Specifications:
  • Complies with SATA 1.0a Specification
  • Supports SATA Generation 1 with Transfer Rate up to 1.5Gbps (150MB/s)
  • Supports Spread Spectrum in Receiver
  • Supports SATA Power Saving Mode: Partial and Slumber
• IDE (ATA) Interface Specifications:
  • Complies with ATA Specification
  • Complies with Ultra ATA 133 with Transfer Rate up to 133MB/s
  • Supports PIO Mode 0, 1, 2, 3, 4, 5, 6
  • Supports MDMA mode 0, 1, 2
  • Supports Ultra DMA Mode 0, 1, 2, 3, 4, 5, 6
  • Supports Master/Slave/Cable Select Mode by Configuration Switches

Software Supports:

• Windows 7/Vista/XP/98SE/ME/2000 Operating Systems

Package Includes:

• Bi-directional Adaptor
• SATA Cable
• Power Cable
  

• Jmicro JM20330 Chipset
• Plug & Play and Hot-swapping capability
• 150MB/s transfer rate
• Automatic SATA 3.0/1.5 Gbps speed negotiation
• Serial-ATA 1.0 specification compliant
• Support Serial ATA hot-plug
• Support ATA Host Bridge
• Support ATA PIO and UDMA modes 0 to 4
• ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s
• ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count
• Support 3.5” IDE hard drives and 5.25” optical drives
• Ultra low power consumption
• Work for both AC and DC couple between the transmitter and the receiver
• Provide specified OOB signal detection and transmission
• Support Spread Spectrum Clocking to reduce EMI
• Support Partial/Slumber power management
• Provide adjustable TX signal amplitude and pre-emphasis level
• Master/Slave mode support
• Support Windows 98SE/ME/2000/XP Operating System

Included
Bi-directional Adaptor, SATA Cable, Power Cable, CD Driver, and User manual.